Researcher · Mechanics of Advanced Fiber Reinforced Polymer Composites

Basharat Ahmad
Wani, Ph.D.

Mechanics of Advanced Fiber Reinforced Polymer Composites

Born in Sopore, Jammu & Kashmir, India, I develop experimentally validated computational approaches to understand damage evolution and predict the fatigue performance of fibre-reinforced polymer composites – connecting microscale mechanisms with structural response.

Portrait of Basharat Ahmad Wani
Ph.D. · Mechanical EngineeringBorn in Sopore, Jammu & Kashmir, India
4Peer-reviewed journal papers listed
2026Ph.D. completed
Q1Journal publications, as listed in CV
ECCM22Research presented · Oslo, Norway
About me

Engineering insight from the microscale up.

A research profile at the intersection of composite materials, experimental mechanics and computational modelling.

LinkedIn profile identity
“Mechanics of Advanced Fiber Reinforced Polymer Composites” · Born in Sopore, Jammu & Kashmir, India · View LinkedIn profile ↗

I completed my Ph.D. in Mechanical Engineering at the Indian Institute of Technology (IIT) Tirupati in August 2026. My doctoral research focused on high-cycle fatigue-life estimation of CFRP composite plies and laminates through an integrated experimental and computational micromechanical modelling approach.

My work spans GFRP and CFRP materials, composite manufacturing, quasi-static and fatigue testing, fracture characterization, digital image correlation, microscopy and fractography, and RVE-based finite element modelling.

My central research goal is to link constituent-level behaviour and fibre/matrix interface degradation to the damage evolution and fatigue performance of composite materials and structures.
Research interests
Composite materialsComputational micromechanicsMultiscale modellingFatigue & fractureDamage mechanicsFibre/matrix interfacesCohesive-zone modellingRVE modellingExperimental mechanicsComposite durability
Research themes

What I work on

Integrated experimental and numerical methods to investigate composite behaviour, failure mechanisms and durability.

⌁

Computational micromechanics

RVE-based finite element modelling, constituent-level mechanics, microstructural effects and multiscale analysis of FRP composites.

↗

Fatigue & life prediction

Tension–tension fatigue, fatigue degradation, cumulative damage and life estimation of composite plies and laminates.

◈

Interface & fracture mechanics

Fibre/matrix interface characterization, SFFT, Mode-I/Mode-II fracture experiments and cohesive-zone modelling.

⌘

Damage & failure mechanisms

Matrix cracking, interface debonding, fibre fracture, interlaminar damage, microvoid effects and progressive failure.

◎

Experimental mechanics

Composite fabrication, quasi-static and fatigue testing, DIC, SEM, optical microscopy and fractographic analysis.

▱

Structural composite systems

Research across longitudinal, transverse, off-axis and cross-ply FRP composite configurations.

Research journey

Experience & research projects

Doctoral research combining hands-on material characterization with physics-based computational modelling.

JUNE 2026 – PRESENT

Project Associate (Temporary)

Indian Institute of Technology Tirupati
  • Project: Estimating Elastic and Strength Properties of Unidirectional and Bidirectional Composites through Computational Micromechanical Modeling – R&DE (E), DRDO Project.
JAN 2021 – AUG 2026

Doctoral Researcher / Senior Research Fellow

Indian Institute of Technology Tirupati · Supervisor: Dr. Subbareddy Daggumati
  • Investigated GFRP and CFRP composite plies, laminates and structural components, focusing on damage evolution, fatigue, fracture and failure prediction.
  • Fabricated composite laminates using the Vacuum Infusion Process and performed quasi-static and tension–tension fatigue testing.
  • Conducted DIC, optical microscopy, SEM and fractography to identify microscale failure mechanisms.
  • Performed Mode-I DCB and Mode-II ENF fracture experiments and developed corresponding finite element models.
  • Developed a coupled Single Fibre Fragmentation Test (SFFT) and FE framework for identification and validation of fibre/matrix interface properties.
  • Built RVE-based computational micromechanical models and FORTRAN-based ABAQUS VUMAT subroutines for fatigue damage and life prediction.
DECEMBER 2018 – FEBRUARY 2019

Research Intern

Indian Institute of Science (IISc), Bengaluru, Karnataka, India · SIAM Lab, Mechanical Engineering Department

Research internship associated with dissimilar friction stir processing of aluminium and magnesium alloys for aerospace applications.

SPONSORED RESEARCH · ARDB, GOVERNMENT OF INDIA

June 2024 – August 2026 · Senior Research Fellow, IIT Tirupati · PI: Dr. Subbareddy Daggumati. Investigated static and fatigue response of T700/LY1564 CFRP systems, fracture behaviour, fibre/matrix interface properties, and microscale-to-macroscale damage relationships.

Research output

Selected publications

Peer-reviewed journal contributions in composite mechanics, fatigue prediction, micromechanical modelling and interface characterization.

Composite mechanics2025

Concurrent experimental testing and computational micromechanical modeling of a UD NCF GFRP composite ply

Composite Structures · 352, 118664

View article / DOI ↗
Fatigue prediction2026

Fatigue life estimation of a UD CFRP composite ply under transverse tensile load – An experimental & computational micromechanical RVE approach

International Journal of Fatigue · 205, 109394

View article / DOI ↗
Damage evolution2026

On the Prediction of Fatigue Life and Microscale Damage Evolution in Cross-Ply CFRP Laminates: An Experimentally Validated Micromechanical Framework

International Journal of Fatigue

View article / DOI ↗
Interface characterization2026

A physics-based hierarchical experimental & computational framework for unique identification & validation of Mode-II fiber/matrix interface properties

Engineering Fracture Mechanics · 345, 112425

View article / DOI ↗

Manuscripts in preparation

  1. Computational Micromechanical Fatigue Modeling of UD FRP Composite Plies & Laminates: Advances, Challenges, and Future Directions.
  2. Effect of Thermal Residual Stresses on the Predicted Transverse Tension–Tension Fatigue Life of a UD Composite Ply: A Computational Micromechanical Approach.
Methods & tools

Technical expertise

A blend of simulation, material modelling, laboratory testing and data analysis.

Finite element analysis

ABAQUS/Standard, ABAQUS/Explicit, ANSYS APDL, HyperMesh; structural, fracture, fatigue and micromechanical simulations.

Computational modelling

RVE modelling, computational micromechanics, cohesive-zone modelling, progressive damage, interface debonding and multiscale modelling.

Material modelling

FORTRAN-based ABAQUS VUMAT development, constitutive modelling, Paris-law formulations, cumulative damage and interface degradation.

Experimental mechanics

Quasi-static and fatigue testing, DCB, ENF, SFFT, VIP composite manufacturing, DIC, SEM, optical microscopy and fractography.

Programming

FORTRAN, Python and MATLAB; simulation automation, RVE generation, post-processing and experimental data analysis.

Materials & systems

GFRP, CFRP, UD composite plies, NCF composites, cross-ply laminates, T700/LY1564 CFRP and epoxy systems.

Academic background

Education

Indian Institute of Technology (IIT) Tirupati

Doctor of Philosophy (MS + PhD) – Mechanical Engineering · January 2021 – August 2026

CGPA: 8.77/10 · Ph.D. completed August 2026

Dissertation: High Cycle Fatigue Life Estimation of CFRP Composite Plies & Laminates: An Experimental & Computational Micromechanical Modeling Approach.

National Institute of Technology (NIT) Srinagar

B.Tech, Mechanical Engineering · August 2016 – June 2020

CGPA: 8.295/10

Dissertation: Experimental Investigation of Mg/SiC Composite Fabricated via Friction Stir Processing.

Recognition & dissemination

Awards & conference contributions

ANRF International Conference Travel Grant · 2026Travel support awarded by the Anusandhan National Research Foundation, Government of India, to attend and present research at ECCM22 in Oslo, Norway.
Third Prize · Best Poster PresentationScholars Symposium, IIT Tirupati.

Selected conference presentations

30–31 JAN 2025

19th ISAMPE National Conference on Composites (INCCOM19)

R&DE (E), DRDO, Pune, India

Fatigue Life Estimation of Neat Epoxy Polymer Under High Cycle Loads – An Experimental and Computational Study.

17–19 DEC 2025

10th International Congress on Computational Mechanics & Simulations (ICCMS2025)

IIT Bhubaneswar, India

A Computational Micromechanical Framework to Predict the Effect of Microvoids on the Transverse Tension–Tension Fatigue Life of a UD FRP Composite Ply.

21–25 JUN 2026

22nd European Conference on Composite Materials (ECCM22)

Oslo, Norway

Fatigue Life Estimation of Cross-Ply CFRP Composite Laminates: An Experimental & Computational Micromechanical RVE Approach.

Professional profile

Skills, credentials & languages

Additional details from the LinkedIn profile PDF you shared.

Top skills listed

Finite Element Analysis (FEA) · Fortran coding · ABAQUS

Professional membership & recognition

Member, ASHRAE · ITS ANRF Travel Grant

Certifications & training

Additive Manufacturing · Sustainable Concrete Construction – Issues & Challenges · Advanced Materials Processing and Characterization · Manufacturing Technologies for Tissue Engineering and Drug Delivery Systems · Application of Machine Learning and Deep Learning in Engineering Problems

Languages – Full professional proficiency

Urdu · English · Kashmiri

Languages – Elementary proficiency

Hindi · Judeo-Arabic

Contact & hometown

Born in Sopore, Jammu & Kashmir, India · me21d002@iittp.ac.in · wanibasharat677@gmail.com · +91 7889731547

Connect & collaborate

Let's discuss composite mechanics.

For research collaborations, academic opportunities and technical discussions, feel free to get in touch.